Medium Bi-Pin (G13)
The Halco T848FR12/850/BYP4/DSE/LED
T8 48 Inch Ballast Bypass lamp operates on 120-277V. The Halco 84888 is 5000K Cool White color temperature and rated at 1800 lumens, with Integrated Ballast. Rewiring of existing fixture is necessary. Follow MFG Instructions. Single Ended live feed. Must use non shunted sockets. 50,000 hour rated. Our ballast-bypass LED T8 tube is a no frills energy saver solution for the common fluorescent tube. Simple steps is all it takes to retrofit your existing tube fixture into a full LED product to start saving energy. These bulbs run straight off the line voltage and do not require an external driver to be installed. Rated for an L70 lifetime of 50,000 hours, these bulbs will also save you on maintenance time and cost since they will continue running many times over the typical fluorescent tube life! 5 year warranty. Please Note: To install this lamp you must bypass the ballast and following labeling requirements. NON SHUNTED sockets must be used when retrofitting the fixture to direct wired LED T8. Please use replacement socket codes FE1126RW 1-1126RW-2 OR FE1126SW 1-1126SW-1-2. You will need 2 sockets per lamp.
Stock replacements to the standard fluorescent bulbs for the home with T8 LED tubes. This LED tube is a T8 48-inch Ballast Bypass in cool white. It puts out 1800 lumens and features an integrated ballast.
Our T8 LED tubes offer no frills, but all the bells and whistles are unnecessary here. The LED tube will save energy and money, and it's longer-lasting than the common fluorescent lights as well. Consumers don't have to worry about maintenance over time, especially in comparison with traditional tubes. The job of rewiring is simple enough that it can be a DIY project. Follow the requirements listed on the label after bypassing the ballast. Retrofitting current fixtures so that they're compatible with the T8 tubes is effortless since they use the line voltage and don't need an external driver.
Save when you bulk buy T8 LED tubes at Atlanta Light Bulbs.