HID36/850/MV2/LED PROLED
Sold in Quantities of:
1 unit(s)
DISCOUNTED PRICE:
ALB Price:
$89.99
$69.99
(You save $20.00)
per item
This item is Eligible for ALB Bucks!
HID36/850/MV2/LED PROLED,LED Corn Cob Retrofit Bulb 120-277V,The Halco 84005 replaces the 80936. This is a 5000K 4860 lumen non-dimmable omnidirectional 150 watt metal halide replacement lamp. Ballast must be disconnected and power run directly to the socket. E26-medium base UL listed. 5 Year Warranty
LED Corn Cob Retrofit Bulb 120-277V The Halco 84005 replaces the 80936. This is a 5000K 4860 lumen non-dimmable omnidirectional 150 watt metal halide replacement lamp. Ballast must be disconnected and power run directly to the socket. E26-medium base UL listed. 5 Year Warranty Energy-efficient alternative to traditional High Pressure Sodium and Metal Halide lamps - UL Listed for damp locations - -30°C(-22°F) to 60°C(140°F) operating temperature range - 82 CRI for quality and consistent color rendering - 120-277V input range (must bypass ballast) ^
This Item Replaces
This product is a direct replacement for the following items:
- 175W/METAL HALIDE LED REPLACEMENT
- HALCO 80936
- HALCO HID36/850/MV/LED
- HID36/850/MV/LED
- LED REPLACEMENT FOR 175W METAL HALIDE
- LED-8024
- MH150/LED/E26
- MH175/U/MED LED REPLACEMENT
- MVR175/U/36/LED
- MVR175/U/MED LED REPLACEMENT
Specifications
| Brand | Halco Lighting |
| Technology | LED |
| Lumen Output | 4860 |
| Equivalent Wattage | 150 Watt Metal Halide |
| Actual Wattage | 36 |
| Voltage | 120-277 |
| Color Temperature (Kelvin) | 5000 |
| Burn Position | Universal |
| Beam Degrees | 360 |
| Color Rendering Index | 82 |
| Base Type | Medium Screw (E26) |
| Outdoor Use | Yes |
| Dimmable | No |
| DLC Listed | No |
| Length (Inch) | 8.98 |
| Width (Inch) | 3.43 |
| Diameter (Inch) | 3.43 |
| Additional Certifications | UL Listed for damp locations |
| Manufacturers Warranty | 5 Year Warranty |
| Manufacturers Notes | Utilizing only 36 Watts of consumable energy, the 36W Light Bulb easily replaces up to 150 Watt Metal Halide bulbs in Roadway, Street Lights, Wall Packs, Post Lights and Garage Lighting Fixtures. This LED Retrofit results in an energy saving of $1,014.00 per fixture. Installation is quick and simple. Simply remove the existing metal halide from the light fixture and bypass the HID ballast. Next screw iin this multi-volt (110v-277v) retrofit lamp. The omni-direction LED array emits light in 360 degrees. No cooling fan so no extra parts to break. (Please note: Removal of the original HID Ballast from the existing fixture may be required fo45 year life based on 10 hours of use per day. Lamp is UL approved for damp location. Do not use where directly exposed to water. Do not use with dimmers. |
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Maximum Purchase:
unit(s)
Lead Time:
IN STOCK – Same Day Shipping (order by 4PM ET M-F)
Shop Other Products From: 
Loading... Please wait...
