The Lithonia Lighting WF6 LED 30K MW M6 *236VG3 Wafer Light is our Most Popular LED Down Light - 3000K Warm White - 120V - Ultra Thin 6" Wafer - Matte White Finish - The 6 inch Wafer LED is an ultra-thin recessed downlight with a narrow remote driver box for applications with shallow ceiling plenum. The Wafer LED is a comprehensive recessed downlight, pot light housing are not necessary. The Wafer WF6 LED 30K MW M6 236VG3 LED allows quick and simple installations and can be installed from below in application with as little as 2 inch plenum clearance. Ideal for shallow ceiling plenum since a pot light housing is NOT required. IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable,powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Steel spring clip for easy installation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Not suitable for pulling wires. Aperture 4.9" Ceiling opening 6", Overlap trim 6.7", Height 1.1"
Save On Lithonia Lighting WF6 LED 30K MW M6 Wafer Lights
If you have a low ceiling or a ceiling with a shallow plenum, then the WF6 LED 30K MW M6 light from Lithonia Lighting is just what the doctor ordered—or the electrician, in this case. The WF6 LED light is a recessed downlight that's extremely thin, which is why it's ideal for spaces with ceilings that fall a bit low. You only need about two inches of plenum clearance, and installation is a breeze, even if you install the light from below.
Why Use LED Wafer Lights
A great reason to consider the WF6 LED 30K MW M6 LED light is that you don't need any pot light housing. The driver is IC-rated. Both the driver and the fixture can come into contact with insulation, as well, which allows for versatility in terms of installation.
The round fixture of the WF6 LED features integral LED lights around the edge. The outer frame is an aluminum die cast covered with a powder coat paint that ensures durability and longevity while also preventing rust. The fixture's steel spring clip guarantees effortless installation. It's rated for wet locations, a feature that adds to its versatility. You can even install a dimmer from an approved source.
The Lithonia light promises a life rating of 36,000 hours and puts out 1,020 Lumens. It's good for 13 watts at 120 volts, as well. With that power, you can easily light up any room that has a recessed ceiling.
Brighten up your dark spaces with ease. Consider installing the Lithonia Lighting WF6 LED 30K MW M6 light. Check out the variety of LED bulbs and fixtures available at Atlanta Light Bulbs.